ADLINK PCI-8154 - Manual (Page 121)

MotionCreatorPro 111
13.Buttons:
Z Axis0 Reset: clicking this button will set all positioning
counters of selected axis to zero. The related functions
are:
_8154_set_position()
_8154_set_command()
_8154_reset_error_counter()
_8154_reset_target_pos()
Z Axis1 Reset: clicking this button will set all positioning
counters of selected axis to zero.
Z ClearPlots: Clear the Motion Graph.
Z Save Config: Save current configuration to 8154.ini and
8154MC.ini.
Z Close: Close the menu.