ADLINK PCI-8154 - Manual (Page 149)

Function Library 139
6.5 Velocity mode motion
@ Name
_8154_tv_move – Accelerate an axis to a constant velocity with
trapezoidal profile
_8154_sv_move – Accelerate an axis to a constant velocity with
S-curve profile
_8154_emg_stop – Immediately stop
_8154_sd_stop – Decelerate to stop
_8154_get_current_speed – Get current speed
_8154_speed_override – Change speed on the fly
@ Description
_8154_tv_move :
This function is to accelerate an axis to the specified constant
velocity with a trapezoidal profile. The axis will continue to
travel at a constant velocity until the velocity is changed or the
axis is commanded to stop. The direction is determined by the
sign of the velocity parameter.
_8154_sv_move :
This function is to accelerate an axis to the specified constant
velocity with a S-curve profile. The axis will continue to travel at
a constant velocity until the velocity is changed or the axis is
commanded to stop. The direction is determined by the sign of
velocity parameter.
_8154_emg_stop :
This function is used to immediately stop an axis. This function
is also useful when a preset move (both trapezoidal and S-
curve motion), manual move, or home return function is per-
formed.
_8154_sd_stop :
This function is used to decelerate an axis to stop with a trape-
zoidal or S-curve profile. This function is also useful when a