ADLINK PCI-8154 User Manual
Page 115
Advertising
MotionCreatorPro
105
sing is effective. –5000.0 means 5000.0 in the minus
direction.
Z
Accel. Time: Set the acceleration time in units of sec-
ond.
Z
Decel. Time: Set the deceleration time in units of sec-
ond.
Z
SVacc: Set the S-curve range during acceleration in
units of PPS.
Z
SVdec: Set the S-curve range during deceleration in
units of PPS.
Z
Move Delay: This setting is effective only when repeat
mode is set “On.” It will cause the 8154 to delay for a
specified time before it continues to the next motion.
14.Speed_Profile: Clicking this button will show the Speed
Profile.
15.Digital I/O: Display and set Digital I/O. The related func-
tions are: _8154_get_gpio_output(),
_8154_get_gpio_input(), _8154_set_gpio_output().
Advertising