ADLINK PCI-8154 - Manual (Page 117)

MotionCreatorPro 107
18.Stop Button: Clicking this button will cause the 8154 to
decelerate and stop. The deceleration time is defined in
“Decel. Time.” The related function is _8154_sd_stop().
19.I/O Status: The status of motion I/O. Light-On means
Active, while Light-Off indicates inactive. The related
function is _8154_get_io_status().
20. Buttons:
Z Next Card: Change operating card.
Z Next Axis: Change operating axis.
Z Save Config: Save current configuration to 8154.ini And
8154MC.ini.
Z Close: Close the menu.