Doremi DC-POST - Manual (Page 13)

4 Ingest Phase
4.1 Ingesting content form a USB Drive
If the content to ingest is on a USB drive, plug the drive into the DC-Post's USB Port and wait for the
Ingest window to appear (see Figure 13).
Note: This assumes that the DC-Post has been installed according to the “Hard Disk Drive
Installation” Document that ships with the DC-Post.
• Select an item by clicking on it.
• Click on the “Ingest” button (see Figure 11).
• The ingest process will then start.
• If an item was already ingested, it will appear in gray as illustrated in Figure 11 below.
• To see the progress of items being ingested click on the “Monitor” tab. See Figure 11 below.
• You can also select multiple items by clicking the “Ctrl” button and then clicking on the “Ingest”
button.
Note: You can playback an already ingested content while ingesting other content. This is not the
same as the “Pngest” feature (discussed below), which allows for simultaneous ingest and playback of
the same content.
Figure 11: Ingest Graphical User Interface (GUI)
DPT.OM.001128.DRM Page 13 of 101 Version 1.2
Doremi Labs
CPL has already
been Ingested
“Monitor”
Tab
CPL has not yet
been Ingested
“Ctrl” button
“Ingest”
button