6 playback of a live event, 7 adding a live event cpl, 8 create and play an spl using a live event cpl – Doremi DC-POST User Manual
Page 63
13.6 Playback of a Live Event
By connecting a Doremi MPEG Streamer to the DC-Post you can play a live event. You can create a
Show Playlist for the live event using theater effects such as closing and opening of curtains,
previews, trailers, and advertisements before the live event is scheduled to start. The live event is not
prerecorded and therefore cannot be rewound or fast forwarded.
Note: See the DCP-2000 and DCP-2K4 Field Installer Manual for instructions on how to setup the
Doremi MPEG Streamer in the “Live Manager” section. It can be found at the following location:
13.7 Adding a Live Event CPL
•
If you have not already done so, connect a Doremi MPEG Streamer to the DC-Post.
•
Go to the “Editor” tab on the CineLister GUI, you will see a reel icon that has “live” next to it.
◦
If you don't see the “live”icon, you might need to click the “Refresh” button. If you still don't
see it, this means the MPEG Streamer has not been added to the “Live Manager”.
•
Select “Doremi Live Streamer” from the elements window in the left pane.
•
Click the “Add to Show Playlist” button, it will appear in the right pane.
•
Go to the “Playback” tab and press the “Play” button.
13.8 Create and Play an SPL Using a Live Event CPL
•
Follow the steps described above to add a Live Event CPL (see “How to Add a Live Event
CPL”).
•
Select the desired elements for your SPL from the elements list in the left pane.
◦
You can select one or several elements to be added at the same time using “ctrl”.
•
click the “Add to Show Playlist” button, the elements will appear on the right pane.
•
Make sure to click the “Save” button when you are done creating your SPL.
•
You will be prompted to a password window; enter the appropriate password.
•
Next, go to the “Playback” tab and click the “Play” button.
DPT.OM.001128.DRM Page 63 of 101 Version 1.2
Doremi Labs