2 trigger cue creation, 3 how to create a new trigger cue – Doremi DC-POST User Manual
Page 50
Advertising
12.2 Trigger Cue Creation
12.3 How to create a new Trigger Cue
•
From the “Macro Editor “ GUI, click on the “Trigger Cue” tab (see Figure 60).
•
Click the “Plus” button to add a new “Trigger Cue”.
•
You will be prompted a window asking you to define a name for the “Trigger Cue” (see Figure
61).
•
Enter the name you wish to use, this will be the name used by CineLister when inserting this
Trigger Cue in a Show Playlist. Figure 62 below displays the name for the new trigger in the left
panel of the GUI.
•
Next, you must define the trigger, click the “Connect to an event” button and you will be
prompted to Figure 62 below.
Figure 61:“Trigger Cue Name” Window
DPT.OM.001128.DRM Page 50 of 101 Version 1.2
Doremi Labs
Advertising