Doremi DC-POST - Manual (Page 81)

17.6 Raw Device Removal
To remove the Raw device, click on it in the left part of the Device Manager GUI and click the “Delete”
button (see Figure 100).
17.7 ISE1 Device
The ISE1 Device provides for communication with the IMAX Secure Enclosure. If more information is
needed, please contact Doremi Labs Technical Support.
17.8 CSS Device
The CSS Device provides for communication with the Sony Cavity Security System. If more
information is needed, please contact Doremi Labs Technical Support.
17.9 3D Projector Configuration
17.9.1 Projector Configuration for 3D or 48fps
In 3D or 48fps mode, the DC-Post video output is in the YCxCz color space. The projector itself needs
to be properly configured to the YCxCz color space in 3D or 48fps mode for proper display. Contact
your projector vendor to know how to configure the projector properly.
17.10 Dolby 3D Support
To enable the Dolby 3D support, please contact Doremi Labs to purchase the appropriate license and
set up instructions.
17.11 RealD 3D Support
To enable the RealD 3D support, please contact Doremi Labs to get the appropriate license and setup
instructions.
17.12 Sensio 3D Support
To enable the Sensio 3D support, please contact Doremi Labs to get the appropriate license and setup
instructions.
17.13 Closed Caption Support
To enable the Rear Window devices Closed Caption support, please contact Doremi Labs to get the
appropriate license and setup instructions.
DPT.OM.001128.DRM Page 81 of 101 Version 1.2
Doremi Labs