Doremi DC-POST - Manual (Page 34)

8 Play 2D Content in 3D Mode
8.1 3D Mode Set Up
You can play 2D content within 3D Shows without having to generate a stereoscopic version of the 2D
content. Changing the mode of the SPL to 3D does not automatically make the content 3D. The
content must be in 3D/48fps format to create a 3D SPL.
• Click the “Show Playlist Properties” button (see Figure 37).
• Select the 3D mode from the “display mode” drop-down window (see Figure 38).
• Click Close.
• The “Show Playlist Properties” button will reflect the name of the SPL and what mode it is set
to (see Figure 39).
Note: In 3D or 48fps mode, the DC-Post video output is in the YCxCz color space. The projector itself
needs to be properly configured to the YCxCz color space in 3D or 48fps mode for proper display.
Contact your projector vendor to know how to configure the projector properly or see the Section
“Device Manager Setup” in this manual below.
Figure 37: CineLister GUI – Editor Tab
DPT.OM.001128.DRM Page 34 of 101 Version 1.2
Doremi Labs
“Show
Playlist
Properties”
button
“Delete
Content”
button