Protecting yourself and the dc-post – Doremi DC-POST User Manual
Page 97
PROTECTING YOURSELF AND THE DC-POST
•
Never touch the AC plug with wet hands.
•
Always disconnect the RCV2 from the power supply by pulling on the plug, not the cord.
•
Allow only a Doremi Labs, Inc. dealer or qualified professional engineer to repair or
reassemble the RCV2. Apart from voiding the warranty, unauthorized engineers might touch
live internal parts and receive a serious electric shock.
•
Do not put, or allow anyone to put any object, especially metal objects into the RCV2.
•
Use only an AC power supply. Never use a DC power supply.
•
If water or any other liquid is spilled into or onto the RCV2, disconnect the power, and call your
dealer.
•
Make sure the unit is well ventilated, and away from direct sunlight.
•
To avoid damage to internal circuitry, as well as the external finish, keep the RCV2 away from
sources of direct heat (stoves, radiators, etc.).
•
Avoid using aerosol insecticides, etc. near the RCV2. They may damage the surface, and may
ignite.
•
Do not use denatured alcohol, thinner or similar chemicals to clean the RCV2. They will
damage the finish.
•
Modification of this equipment is dangerous, and can result in the functions of the RCV2 being
impaired.
•
•
Never attempt to modify the equipment in any way.
•
In order to ensure optimum performance of your RCV2, select the setup location carefully, and
make sure the equipment is used properly. Avoid setting up the RCV2 in the following
locations:
◦
In a humid or dusty environment
◦
In a room with poor ventilation
◦
On a surface which is not horizontal
◦
Inside a vehicle such as a car, where it will be subject to vibration
◦
In an extremely hot or cold environment
DPT.OM.001128.DRM Page 97 of 101 Version 1.2
Doremi Labs