Doremi DC-POST - Manual (Page 38)

10 Automation Cues
An Automation Cue is an action/demand that is sent from the DC-Post to any external device
connected to the DC-Post for the purpose of being inserted into a Show Playlist. Upon installation of
the DC-Post, Automation Cues can be predefined by the operator, transferred from an “xml” file, or
added manually. Automation Cues can be added to CPL's and SPL's using CineLister.
A Macro Automation Cue consists of two parts, an automation cue and a trigger cue. Trigger Cues are
explained fully in Section “Trigger Cues” below. A trigger cue is an action that is sent to the DC-Post,
whereas an automation cue is sent from the DC-Post. Also, Macro Cues are are a sequence of
actions, whereas an Automation Cue is only one action.
10.1 Macro Creation Using “Macro Editor”
• Go to the CineLister Menu, click Doremi Labs and select “Macro Editor”.
• The “Macro Editor” GUI will appear (see Figure 43).
• Click on the “Plus” button to begin the creation process.
• You will be prompted to enter a name for the Marco Automation (see Figure 44).
• Click the “Ok” button when you are done and the “Macro Editor” GUI will appear.
• Click on Save after you are done creating the Macro Automation Cue.
• The new Macro will appear in the “Macro Editor” Window (see Figure 45).
• Click the Save button when you are done. It is very important to click the save button whenever
you have finished completing any task.
Figure 43: “Macro Editor” Window
DPT.OM.001128.DRM Page 38 of 101 Version 1.2
Doremi Labs
“Insert a new
Action” Button
“Macro”
Window
“Plus”
Button
“Minus
Button