Doremi DC-POST - Manual (Page 78)

17 Automation Libraries Management
Support for theater automation control is also provided. The list of currently supported devices is the
following:
 eCNA
 JNior
A pre-built library of supported automation commands is available for each of these two devices.
These automation commands can then be added to Macro Cues as presented in Section “Automation
Cues” above.
17.1 eCNA Device Addition
• Click the Add button in the Device Manager GUI and select eCNA (see Figure 98).
• Then enter the eCNA device IP address in the appropriate field as presented below.
• Make sure the Enabled field is checked in the top-right corner of the GUI (see Figure 98).
• Click the Save button in order to record your settings. You will be asked for a password.
Figure 98: Device Manager GUI – eCNA Device Set Up
DPT.OM.001128.DRM Page 78 of 101 Version 1.2
Doremi Labs
eCNA IP
address field
“Add”
button
“Enabled”
checked
“Delete”
button
“Save”
button