Doremi DC-POST - Manual (Page 60)

13.4 Pause Mode
13.4.1 Pause Mode Functions
• Use the Pause button to pause the playback. Note: Clicking the Stop button will eject the SPL.
• Use the Next and Previous buttons to go to the next or previous CPL in the Show Playlist.
• Use the Fast Forward and Rewind buttons to forward or rewind within a CPL. The default value
is set at 3 minutes, see below for instructions on how to adjust the value.
• Use the Play button in order to resume from where you paused.
• Select the playback mode from the “Mode” drop-down list: Play; Loop; Play then rewind; or
Play then eject. You will be prompted to a password window to confirm the mode, the default
mode is Play.
Figure 76: Playback Tab During Pause
DPT.OM.001128.DRM Page 60 of 101 Version 1.2
Doremi Labs
“Skip to
Previous
Clip” button
Rewind 3
minutes
“Skip to Next
Clip” button
Fast Forward 3
minutes
Clip progress bar
Mode list
box