5 raw device addition, 1 adding a raw device – Doremi DC-POST User Manual
Page 80
17.5 Raw Device Addition
A “Raw” device allows for easy communication with an external device across an Ethernet connection
using Raw data formatted as text or binary strings. However, the Raw device does not have a pre-
built library, with a set of supported automation commands. The raw device is intended only as a
means of communication between devices).
17.5.1
Adding a Raw Device
•
Click the Add button and select Raw from the Device Manager window (see Figure 100).
•
Enter the IP address of the Raw device in the “Device IP” field (see Figure 100).
•
Chose the protocol to be used (TCP or UDP) and the proper Port number (see Figure 100).
•
Click the “Save” button to save the settings, you will be asked for a password.
Figure 100: Device Manager GUI – Raw Device Set Up
DPT.OM.001128.DRM Page 80 of 101 Version 1.2
Doremi Labs
“Add”
button
“Delete”
button