Doremi DC-POST - Manual (Page 41)

10.4 Actions Explained
• Delay: delay the macro execution for a specific duration.
• General Purpose Output: change the position of a GPO line.
• Projector Dowser: open or close the projector dowser.
• Projector Lamp: turn the projector lamp ON or OFF.
• Projector Channel Switch: switch to a projector channel number from 1 to 16.
• Projector Macro: used to recall preset DLP projector macros by name (e.g., for Barco).
• Playback Actions: select an action between Play, Pause, Toggle Play/Pause or Recue Show.
• Video Output Action: choose between “Default Video Output,”“Play all clips at 48fps,” and
SDI in.
• Send Message: used for sending a text or a binary message to a device.
• Library: used for sending a predefined message to a specific device (e.g., eCNA, JNior, JNior
Expansion Module.
• Purge Pending Macro: used to purge/dismiss macros that are pending.
10.5 Action Settings
 Click the “Delay” button in the “Action” window and define the delay parameters (see Figure
48).
 Click the “Ok” button when the setting is done.
Figure 48: Delay Setup Window
10.5.1 General Purpose Output (GPO) Action insertion
 Click the “General Purpose Output” button in the “Action” window (see Figure 47), you will be
prompted to the “GPO Setup” window (see Figure 49).
 Set the GPO “line number” and “value” using the plus and minus buttons.
 You can choose “On,” “Off,” or “Pulse” from the drop-down menu, click “ok” when you are
done.
DPT.OM.001128.DRM Page 41 of 101 Version 1.2
Doremi Labs
Button used to increase
or decrease the amount
of seconds Button used to increase
or decrease the amount
of minutes