Doremi DC-POST User Manual
Page 87
•
Next, go to the “Playback” tab and press “Play” to load the CPL (see Figure 106).
•
Once the CPL is loaded from the “Playback” tab, you will then see the contents in the CPL
Authoring GUI (see Figure 106).
Note: Make sure you load the CPL from the Playback tab before attempting to use the CPL Authoring
feature, or else nothing will be displayed.
Figure 106:
•
If you don't already have the CPL Authoring GUI open, open up a terminal and enter the
commands as described above, see “How to Access the CPL Authoring GUI” above.
•
If you have already accessed the CPL Authoring GUI, click on it to open.
•
The content of the loaded CPL Stereoscopic Subtitle XML file should now be visible on the
CPL Authoring GUI as presented below:
DPT.OM.001128.DRM Page 87 of 101 Version 1.2
Doremi Labs