Doremi DC-POST - Manual (Page 49)

12 Trigger Cue
A “Trigger Cue” allows for the execution of a Macro Automation Cue upon the occurrence of an event
from an external device using a “Signal” or “General Purpose Input”. When you select an event to
occur from the external device, the occurrence of that event “triggers” a Macro Automation Cue, the
Macro Automation Cue will then be executed. Both the event and the Marco Automation Cue are
defined during the “Trigger Cue” creation. For a full explanation of Macro Cues, see Section 10 above.
Note: The “Signal” comes from an external device connected over the Ethernet. The external device
options are: eCNA, JNior, and Raw.
Example: If a Trigger cue is based on the event “Wait for GPI #1 ON”, you can link a specific Macro
Automation Cue as presented above in order to be executed when GPI #1 is ON.
You have the choice to program Trigger Cues to be available during the whole Show Playlist or only
during a specific Show Playlist element. See Section “Adding a Trigger Cue to a Show Playlist” below.
12.1 Trigger Cue Tab Overview
Figure 60: “Macro Editor” GUI-Trigger Cue Tab
DPT.OM.001128.DRM Page 49 of 101 Version 1.2
Doremi Labs