Televes Serie H-60 User Manual
Page 120
120
TV Mode
- DVB-S2 Parameter Options -
3.3.3.2.2.5.2.- BER
This function enables the viewing again of the BER measure window from another window.
3.3.3.2.2.5.3.- MPEG
Clicking on this option when we have a
DVB-S2
signal, MPEG2 services will be displayed at
standard resolution or up to 1080p of MPEG services. You will see the messages "
Initiating
MPEG
", "
Tuning MPEG
" and then start searching for available services indicated on screen
"
Searching Serv...
"
By using the
we can access the list of channel services. When we have located the
desired service, we press the key
to confirm the selection. Afterwards, if there are several
available audio channels, we can choose among them. We will also be able to change services
when the menus are hidden.
This option has three different information windows, one of them reduced, and two
extended. Using quick key
, the one to be viewed is selected.
The reduced information window shows only the frequency or channel tuned, the name of the
service selected (if it is a garbled channel, the character # will appear beside the name), and the
CBER
measure of the
DVB-S2
signal.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 120