Televes Serie H-60 - Manual (Page 33)

33
EN
of four, identifying each group of polarities as SAT A , SAT B .....). For the purpose, within the
main menu " Measurement Configuration " and also within " LNB and pre-amplifiers " we will
enter the DiSEqC section. The following window will appear:
- Satellite selection in the Multi-switch -
We will choose the right satellite (An 8+1 input multi-switch will only offer satellites A and B).
Once chosen, we will press . The equipment will proceed to send the command that informs
the satellite multi-switch as well as the required band and polarity (previously selected in
LoadVDC ).
When one of the inputs of DiSEqC is selected, if the external unit
power is on Off, an error message will appear.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 33