Televes Serie H-60 - Manual (Page 48)

48
Measures Config.
the action by merely turning , which will annul the new name and restart the process.
A name composed entirely of blank spaces is not accepted either. In this case the meter will
display an “incorrect name” message.
On confirming the memory name change, the following message will appear on screen
"
MEMORY EDITED ".
3.3.1.6.2.- Macromeasures
A Macromeasure is a set of memories that the meter will execute automatically.
When we execute a Macromeasure , the meter recovers each of the associated memories, and
records the measurements in a LOG.
Up to 100 different Macromeasures of up to 250 memories each can be configured.
The meter is capable of measuring from a list of memories every time this is necessary, and the
results may be shown on the display of the meter itself or downloaded to the computer.
A DATALOG is a listing of the results (measurements) obtained on automatically executing a
Macromeasure once or twice.
The meter enables the storage of multiple different Logs. Each LOG can in turn store a great
number of measuring acts. Each of these can in turn store a large number of measurements.
To execute a Macromeasure , we press the quick key to take us to the Macromeasure
function.
The window will show the list of Macromeasures that we have on the meter. The meter will
report by message when there is no Macromeasure stored.
- Macromeasures -
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 48