Televes Serie H-60 - Manual (Page 68)

68
Equipment Config.
3.3.2.3.1.- Energy Management
With this function one can select from three different unit operating modes. The three possible
modes are:
Normal: The meter´s standard operating mode.
Energy-saver: In this mode and using the information offered by the light sensor, the
brightness of the screen backlight is reduced and various electronic
parameters are adjusted, which increase battery life.
AUTO: If the meter is not connected to an external power supply, it operates in a similar way
to the energy saver mode. When the unit is connected, it operates in the same way
as the NORMAL mode.
- Energy management -
3.3.2.3.2.- Automatic Sleep Mode
The unit has a sleep option which can be programmed to activate once the idle time has
lapsed. The idle time can be programmed from 1 to 59 minutes. The user may also deactivate
this function (OFF). The default idle time is set at 10 minutes.
Once the idle time has lapsed the meter will enter sleep mode. The screen will turn off and the
flickering LED lights will indicate this status. Pressing any key on the meter will make it return
to normal mode in less than 1 sec.
3.3.2.3.3.- Automatic disconnecting
The equipment offers the option of automatic disconnecting after a programmable period of
inactivity. This period can be of between 1 and 59 minutes. The user can also disable this
function (OFF). The equipment default value is 15 minutes.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 68