Televes Serie H-60 - Manual (Page 50)

50
Measures Config.
- Macromeasure Options -
The Parameters to be configured:
- Outlet: There are three options. The equipment establishes an order for the execution of the
Macromeasure, stopping at the chosen option.
- Wide band: The Macromeasure executes all its associated memories.
- Ter/Sat: The Macromeasure first executes the terrestrial memory and then the
satellite memory.
- FM/Ter/Sat: The Macromeasure first executes the FM memory, then the terrestrial
one, and finally the satellite memory.
- Log Options: This option enables the selection of a previously created LOG or starting a new
one.
- New Log: Each time the Macromeasure is executed, the meter will create a new
Log to store the results (the measurements).
- Summary Log: The meter will store the results of the Macromeasure in the desired
Log.
- Edit Log Name: With this function, the user can change the name of the new LOG.
For the meter to start recording the measurements of Macromeasure execution, you should
press key on the option “Execute Macromeasure".
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 50