Televes Serie H-60 - Manual (Page 47)

47
EN
3.3.1.6.1.4.- Editing memory name
With this function the user can modify the name of any memory, whether it is already saved or
it is a new one he/she wishes to save.
- Editing memory name -
If it is a memory that is already on the list, press the option EDIT NAME and then, using the
, select from the list the memory whose name you wish to change. Press to accept.
The first character of the name will blink, indicating that it is the one being edited. by turning
the , or using the cursors the other characters of the alphabet, including numbers 0
through 9 will appear. The character " _ " indicates a blank space, meaning that once the name
has been saved, this space will remain blank. When the desired character appears in the
desired position, simply press the button or and the process will start anew with the
next character in the name. If you wish to return to the previous character, press the key
on the keyboard.
The name of each memory must posses between 1 and 7 characters. Name editing ends
once the 7 characters of the name have been edited. If the intended name has fewer than 7
characters, the remaining spaces must be completed with character "
_ ".
If you wish to rename an existing memory, and if the new name has fewer characters than the
old one, you must substitute the characters you wish to erase with "
_ " (i.e., blank spaces).
If you attempt to apply an existing name on the memory list to a new memory, the equipment
will beep. You confirm by pressing (in which case the old memory will be erased) or cancel
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 47