Televes Serie H-60 - Manual (Page 74)

- Ethernet -
If DHCP mode is selected, it will be assigned an IP automatically.
If you select the Static IP mode , it will activate the fields to enter the data manually: IP, mask
and gateway.
Once the meter has been assigned with an IP address, open a web client from any device you
have connected to the same network or to the Internet (PC, tablet, smart phone, etc..).
- If your device is connected to the same network, you must enter the Meter's IP
address in the browser (which is displayed at the bottom of the window function
Ethernet) to access H60.html page.
Example:
http://192.168.10.100/H60.html
- If your device is connected to via the Internet, you must enter your public IP
address to access the page H60.html.
Example:
http://209.85.195.104/H60.html
If everything is correct, the browser will load the web page sent by the Meter to authenticate.
The H60 Meter has a user authentication mode to prevent malicious use. Default data are:
user: admin
passwprd: H60
The user can change the password from the page sent by the Meter. To do this select the
Either you have selected the automatic IP option or if manually entered, the data will be
displayed in the bottom of the screen.
74
Equipment Config.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 74