Televes Serie H-60 - Manual (Page 53)

53
EN
3.3.1.6.3.- DATALOGS
In this section you can see the results of the Macromeasures executed and the results of the
SCAN&LOG . The meter will show a window with a list of DATALOGS . At the bottom of the
window, the contents of each will be shown.
- DATALOGS -
The DATALOGS are the measures that the meter has saved when carrying out one of the
following functions: Macromeasure or SCAN&LOG . The measures of a Macromeasure are
identifiable as being composed of two parts: the first identifies the saved LOG name, and the
second column indicates the name of the macromeasure.
In the event there is no DATALOG stored in the meter’s memory, the message " WITHOUT
DATALOGS " will appear.
- DATALOGS -
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 53