Televes Serie H-60 - Manual (Page 159)

159
EN
5.2.- CLEANING RECOMMENDATIONS
The housing should be cleaned with a highly diluted solution of detergent in water, which should
be applied with a soft, moist cloth.
Dry the equipment thoroughly before using it again.
5.2.1- CLEANING OPTICAL EQUIPMENT
Keeping all connectors on the optical meters/generators completely clean is necessary to
ensure the quality of the measurements.
To do this, you should adhere to the following recommendations:
- Always keep unused connectors covered with the provided dust caps.
- Clean connectors frequently, especially after disconnecting/reconnecting or
manipulating the connectors.
- Properly handle connectors and patch cords used.
- Fibre Cleaning Kit -
To clean the housing, make sure the equipment is disconnected. Do not use
aromatic hydrocarbons or chlorinated solvents for cleaning. These liquids can
attack the materials used for housing construction.
Do not use alcohol or its by-products for cleaning the front panel, and especially
not for cleaning viewing windows. These substances can cause mechanical
damage to materials, reducing their lifespan.
WARNING
01031052_002_EN:103130_00.qxd 10/07/2013 8:01 Página 159