BECKHOFF EL7037 - Manual (Page 221)

Appendix
Fig. 193: Selecting the "Restore default parameters" PDO
Double-click on SubIndex 001 to enter the Set Value dialog. Enter the value 1684107116 in field "Dec" or the
value 0x64616F6C in field "Hex" and confirm with OK (Fig. “Entering a restore value in the Set Value
dialog”).
All backup objects are reset to the delivery state.
Fig. 194: Entering a restore value in the Set Value dialog
Note
Alternative restore value
In some older terminals the backup objects can be switched with an alternative restore
value:Decimal value: "1819238756", Hexadecimal value: "0x6C6F6164"An incorrect entry
for the restore value has no effect.
EL70x7 221 Version 1.0