Yaskawa P7B Drive Bypass - Manual (Page 256)

Specifications C - 2
Standard Drive and Bypass Specifications
The standard Drive and Bypass specifications are listed in the following tables.
!
208-240 VAC
Table C.1 208-240VAC Drive and Bypass Specifications
Bypass Model Number P7B_ * D003 D004 D007 D010 D016 D024 D030 D046 D059 D074 D088 D114
Motor HP
208V 0.5/0.75 1 1.5/2 3 5 7.5 10 15 20 25 30 40
240V 0.5/0.75 1 1.5/2 3 5 7.5 10 15 20 25 30 40
Bypass rated output current (A) 3.5 4.6 7.5 10.6 16.7 24.2 30.8 46.2 59.4 74.8 88 114
Drive Model Number CIMR-P7U 20P4 20P7 21P5 22P2 23P7 25P5 27P5 2011 2015 2018 2022 2030
Drive rated output capacity (kVA) 1.4 1.8 3.0 4.1 6.4 8.8 12.0 18.0 23.0 29.0 34.0 44.0
Drive rated output current (A) 3.6 4.6 7.8 10.8 16.8 23.0 31.0 46.2 59.4 74.8 88.0 115.0
Drive max. output voltage (V) 3-phase; 200, 208, 220, 230, or 240VAC (Proportional to input voltage)
Drive max. output frequency (Hz) 120 Hz
Rated voltage (V)
Rated frequency (Hz)
3-phase, 200/208/220/230/240VAC, 50/60 Hz
Rated input current (A) 4.3 5.5 9.4 13 20 24 37 53 70 89 98 120
Allowable voltage fluctuation + 10%, - 15%
Allowable frequency fluctuation ±5%
Measures for
power supply
harmonics
DC Reactor Optional Built-in
12-Pulse
Rectification
Not possible Possible
Table C.2 208-230VAC Drive and Bypass Specifications
Bypass Model Number P7B_ * D143 D169 D211 D273 D343 D396
Motor HP
208V 50 60 75 100 125 150
230V 50/60 75 - 100/125 150 -
Bypass rated output current (A) 143 169 211 273 343 396
Drive Model Number CIMR-P7U 2037 2045 2055 2075 2090 2110
Drive rated output capacity (kVA) 62.0 73.0 82 120.0 140.0 160.0
Drive rated output current (A) 162.0 192.0 215 312.0 360.0 415.0
Drive max. output voltage (V) 3-phase; 200, 208, 220, 230, or 240VAC (Proportional to input voltage)
Drive max. output frequency (Hz) 120 Hz
Rated voltage (V)
Rated frequency (Hz)
3-phase, 200/208/220/230/240VAC, 50/60 Hz
Rated input current (A) 180 212 237 350 396 457
Allowable voltage fluctuation + 10%, - 15%
Allowable frequency fluctuation ±5%
Measures for
power supply
harmonics
DC Reactor Built-in
12-Pulse
Rectification
Possible
Note: The maximum applicable motor output is given for a standard 4-pole motor. When selecting the actual motor and Drive, be sure that the Bypass and
Drive's rated output current is equal to, or greater than, the motor's rated current.
A phase-shifting transformer is required on the power supply for 12-pulse rectification.
* Only 208V model numbers are shown.
C
o
ntr
o
l
char
act
er
is
ti
cs
P
o
wer
s
upply
ch
ar
ac
te
ri
st
ic
s
C
ont
ro
l
char
act
er
is
ti
cs
P
o
wer
s
upp
ly
char
act
er
is
ti
cs