Yaskawa P7B Drive Bypass - Manual (Page 72)

Digital Operator 3 - 8
Drive Main Menus
The Drive’s parameters and monitoring functions are organized into groups called menus that make it easier to read and set
parameters. The Drive is equipped with five menus. The five menus and their primary functions are shown in Table 3.12 and
are directly available by pressing the MENU key.
Table 3.12 Drive Main Menus
Main Menu Primary Function(s)
- DRIVE -
Operation
The Drive can be run in this menu. Also called the “Monitor” menu.
Use this menu for monitoring values such as frequency reference or output current, displaying fault
history or displaying the fault traces.
- QUICK -
Quick Setting
The Drive can be programmed in this menu.
Use this menu to set/read the most commonly used parameters.
- ADV -
Programming
The Drive can be programmed in this menu.
Use this menu to set/read every parameter.
- VERIFY -
Modified Constants
(Parameters)
The Drive can be programmed in this menu.
Use this menu to set/read the parameters that have been modified from their factory default settings.
- A.TUNE -
Auto-Tuning
For Bypass units Auto-Tuning can only be accomplished through the DriveWizard software. A free
download from www.drives.com.
The Drive can be programmed in this menu.
Use this menu to auto-tune the Drive in order to utilize the bi-directional speed search feature.