Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 112)

1 Ladder Program Instructions
1.6.3 MOVE BITS Instruction (MOVB)
1-102
„ Parameter
„ Program Example
The 10 bits of data starting from MB000000 (bit 0 of MW00000) are transferred to
MB000010 ( bit 0 of MW0000).
Parameter Name Setting
Source • Any bit type register
• Any bit type register with subscript
Dest • Any bit type register (except for # and C registers)
• Any bit type register with subscript (except for # and C regis-
ters)
Width • Any integer type register
• Any integer type register with subscript
• Constant
After transfer
1 0 0 1 1 0 1 1 0 0 1 0 0 0 0 1
0 0 0 0 0 0 0 1 1 1 0 0 1 0 1 0
1 0 0 1 1 0 1 1 0 0 1 0 0 0 0 1
Transfer range
MW00000
MW00001
MW00000
MW00001
Transfer range
0 0 0 0 0 0 1 1 0 0 1 0 0 0 0 1