Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 52)

1 Ladder Program Instructions
1.2.14 SPEND TIME Instruction (SPEND)
1-42
„ Parameter
* Possible to omit.
„ Program Example
The time elapsed from the time data in MW00100 to MW00103 to the time data in
DW00000 to DW00003 is stored to MW00100 - MW00105.
98 yrs 5 mos 11 days 15 hrs 4 min 47 sec - 98 yrs 4 mos 2 days 8 hrs 13 min 8 sec
(MW00100) (MW00101) (MW00102) (MW00103) (DW00000) (DW00101) (DW00102) (DW00103)
= 0 yrs 39 days 6 hrs 51 min 39 sec
(MW00100) (MW00101) (MW00102) (MW00103)
In the operation results, the year is counted as 365 days and a leap year is not taken into consideration.
Also, the number of months is not counted. It is counted in days.
Parameter Name Setting
Source • Any integer type register
• Any integer type register with subscript
Dest • Any integer type register (except for # and C register)
• Any integer type register with subscript (except for # and C reg-
ister)
[Status]* • Any bit type register (except for # and C register)
• Any bit type register with subscript (except for # and C register)
Time Data Before Execution After Execution
MW00100 H0098 H0000
MW00101 H0511 H0039
MW00102 H1504 H0651
MW00103 H0047 H0039
MW00104 −
3394299 (Decimal)
MW00105 −
DW00000 H0098 H0098
DW00001 H0402 H0402
DW00002 H0813 H0813
DW00003 H0008 H0008
INFO