Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 126)

1 Ladder Program Instructions
1.6.13 COPY WORD Instruction (COPYW)
1-116
„ Program Example
A five-bit wide section of data with MB000005 (bit A of MW00000) as the head is shifted
three bits to the right.
1.6.13 COPY WORD Instruction (COPYW)
„ Outline
The COPYW instruction copies the designated number of words (Width) from the beginning
of the copy source register (Source) to the beginning of the copy destination register (Dest).
The copy process copies the entire block of data from the copy source to the copy destina-
tion. Even if there is overlap between the copy source and the copy destination, the full
copy data block is copied to the copy destination.
„ Format
5
0 is entered.
Note: The lower three bits are thrown away.
1 1 1 1 1
0 0 0 1 1
2
MW00000
MW00000
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
Symbol: COPYW
Full Name: Copy Word
Category: MOVE
Icon: