Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 15)

1.1 Relay Circuit Instructions
1-5
1
1.1.2 N.C. Contact Instruction (NCC)
„ Outline
The NCC sets the value of the bit output to OFF when the value of the referenced register is
1 (ON), and to ON when the value of the referenced register is 0 (OFF).
„ Format
„ Parameter
„ Program Example
When MB000100 becomes ON, MB000101 becomes OFF.
Parameter Name Setting
Relay No. • Any bit type register
• Any bit type register with subscript
Symbol: NCC
Full Name: NC Contact
Category: RELAY
Icon:
MB000100
ON
OFF
MB000101
ON
OFF