Yaskawa MP900 Series Machine Controller New Ladder Editor - Manual (Page 184)

1 Ladder Program Instructions
1.8.5 BLOCK CLEAR Instruction (TBLCL)
1-174
„ Format
„ Parameter
* Possible to omit.
„ Program Example
The designated block in the table defined as TABLE1 is cleared using DW00010 to
DW00015 as a parameter table.
Parameter Name Setting
Table Name Table name
Parameter • Register address
• Register address with subscript
[Output]* • Any integer type register (except for # and C registers)
• Any integer type register with subscript
• Subscript register
[Status]* • Any bit type register (except for # and C registers)
• Any bit type register with subscript
Symbol: TBLCL
Full Name: Table Block Clear
Category: TABLE
Icon: