Emerson Process Management MICRO MOTION 2400S - Manual (Page 12)

4 Micro Motion ® Model 2400S Transmitters for DeviceNet ™
Before You Begin
Figure 1-1 Configuration overview
1.8 Pre-configuration worksheet
The pre-configuration worksheet provides a place to record basic information about your flowmeter
(transmitter and sensor) and your application. This information will affect your configuration options
as you work through this manual. You may need to consult with transmitter installation or application
process personnel to obtain the required information.
If you are configuring multiple transmitters, make copies of this worksheet and fill one out for each
individual transmitter.
Chapter 8
Optional Configuration
Chapter 2
Flowmeter Startup
Chapter 1
Before You Begin
Chapter 6
Required Configuration
Chapter 9
Pressure Compensation and
Temperature Compensation
Fill out pre-configuration
worksheet
Start the flowmeter
Configure DeviceNet
communications parameters
(optional)
Characterize the flowmeter
(if required)
Configure volume flow
measurement for gas
Configure cutoffs
Configure damping
Configure flow direction
Configure events
Configure slug flow
Configure status alarm severity
Configure display functionality
Configure digital
communications
Configure device settings
Configure sensor parameters
Configure petroleum
measurement application or
enhanced density application
Configure measurement units
Configure pressure
compensation (optional)
Configure temperature
compensation (optional)
Chapter 10
Measurement Performance
Perform initial meter
verification tests
Zero the flowmeter (optional)