Emerson Process Management MICRO MOTION 2400S - Manual (Page 140)

132 Micro Motion ® Model 2400S Transmitters for DeviceNet ™
Default Values and Ranges
Density Density damping 1.28 sec 0.0–40.96 sec User-entered value is
corrected to nearest value in
list of preset values.
Density units g/cm 3
Density cutoff 0.2 g/cm 3 0.0–0.5 g/cm 3
D1 0.00000
D2 1.00000
K1 1000.00
K2 50,000.00
FD 0.00000
Temp Coefficient 4.44
Slug flow Slug flow low limit 0.0 g/cm 3 0.0–10.0 g/cm 3
Slug flow high limit 5.0 g/cm 3 0.0–10.0 g/cm 3
Slug duration 0.0 sec 0.0–60.0 sec
Temperature Temperature damping 4.8 sec 0.0–38.4 sec User-entered value is
corrected to nearest lower
value in list of preset values.
Temperature units Deg C
Temperature calibration factor 1.00000T0.0000
Pressure Pressure units PSI
Flow factor 0.00000
Density factor 0.00000
Cal pressure 0.00000
T-Series sensor D3 0.00000
D4 0.00000
K3 0.00000
K4 0.00000
FTG 0.00000
FFQ 0.00000
DTG 0.00000
DFQ1 0.00000
DFQ2 0.00000
Events 1–5 Type Low
Variable Density
Setpoint 0.0
Setpoint units g/cm 3
Table A-1 Transmitter default values and ranges continued
Type Setting Default Range Comments