Emerson Process Management MICRO MOTION 2400S - Manual (Page 59)

Configuration and Use Manual 51
Using the Transmitter
Requ
ired Co
nfi
g
u
ratio
n
O
ptio
nal
Con
fig
uration
Using the T
rans
m
itte
r
Us
ing a De
vice
Net T
o
ol
To reset an individual totalizer or inventory:
1. Click ProLink > Totalizer Control or ProLink > ED Totalizer Control (if the enhanced
density application is enabled).
2. Click the appropriate button (e.g., Reset Mass Total , Reset Volume Inventory , Reset Net
Mass Total ).
With a DeviceNet tool
Using a DeviceNet tool, three methods are available for totalizer and inventory control:
• EDS – If you have imported the EDS into your DeviceNet tool, you can perform the following
functions from the EDS user interface:
- Reset mass totalizer
- Reset mass inventory
- Reset liquid volume totalizer
- Reset liquid volume inventory
- Reset API reference volume total
- Reset API reference volume inventory
- Reset gas standard volume totalizer
- Reset gas standard volume inventory
- Reset ED standard volume total
- Reset ED net mass total
- Reset ED net volume total
- Reset ED standard volume inventory
- Reset ED net mass inventory
- Reset ED net volume inventory
• Explicit write – Using a Set, a Reset Total, or a Reset Inventory service, you can perform the
functions listed in Table 7-8.
• Output assemblies – Five output assemblies are provided, supporting the functions listed in
Table 7-9. See the manual entitled Micro Motion Model 2400S Transmitters for DeviceNet:
Device Profile for detailed information.
Table 7-8 Totalizer and inventory control with a DeviceNet tool using explicit write
To accomplish this Use this device profile data
Stop all totalizers and inventories Analog Input Point Object (0x0A)
Instance: 0
Attribute ID: 100
Service: Set
Value: 0
Start all totalizers and inventories Analog Input Point Object (0x0A)
Instance: 0
Attribute ID: 100
Service: Set
Value: 1
Reset all totalizers Analog Input Point Object (0x0A)
Instance: 0
Attribute ID: 101
Service: Set
Value: 1