Emerson Process Management MICRO MOTION 2400S - Manual (Page 64)

56 Micro Motion ® Model 2400S Transmitters for DeviceNet ™
Optional Configuration
8.2 Configuring volume flow measurement for gas
Two types of volume flow measurement are available:
• Liquid volume (the default)
• Gas standard volume
Display (1) Update period ✓ ✓ ✓ 8.9.1
Display language
✓ ✓ ✓
8.9.2
Totalizer start/stop
✓ ✓ ✓
8.9.3
Totalizer reset ✓ ✓ ✓
Auto scroll ✓ ✓ ✓
Scroll rate ✓ ✓ ✓
Offline menu ✓ ✓ ✓
Password
✓ ✓ ✓
Alarm menu
✓ ✓ ✓
Ack all
✓ ✓ ✓
Backlight on/off ✓ ✓ ✓ 8.9.4
Backlight intensity ✓ ✓
Display variables ✓ ✓ 8.9.5
Display precision ✓ ✓
Digital
communication DeviceNet node address
✓ (2) 8.10.1
DeviceNet baud rate
✓ (2) 8.10.2
DeviceNet configurable input
assembly ✓ 8.10.3
Modbus address ✓ ✓ ✓ 8.10.4
Modbus ASCII support ✓ ✓ ✓ 8.10.5
IrDA port usage ✓ ✓ ✓ 8.10.6
Digital communications fault
action ✓ ✓ 8.10.78.10.
7
Fault timeout
✓ ✓
8.10.8
Device settings
✓ ✓
8.11
Sensor parameters
✓ ✓
8.12
Petroleum
measurement
application ✓ ✓ 8.13
Enhanced density
application ✓ ✓ 8.14
(1) These parameters apply only to transmitters with a display.
(2) Cannot be set with the display menus, but can be set with digital communications hardware switches on the face of the transmitter.
Table 8-1 Configuration map continued
Tool
Topic Subtopic ProLink II DeviceNet tool Display Section