Eaton Electrical PROFIBUS-DP EZ204-DP - Manual (Page 86)

For more information visit: www.EatonElectrical.com
Control commands for EZ700
MN05013001E 82
Table 33: Operand overview
Index
(hex) Operand Read Write
00 Parameters J Table 34
×
01 Control byte J Table 35 ×
02 Actual value 1 T × c 1
03 Time setpoint 1 S1 2
×
c 1
04 Time setpoint 2 S2 2
×
c 1
1) The value can only be written if it is assigned to a constant in the
program.
2) A 16-bit value is transferred in data bytes Data 1 – Data 2. It should be
remembered that Data 1 is the low byte and Data 2 the high byte.