Mocomtech CDM-570 - Manual (Page 19)

Page 15 of 54 MN/CDM570L.AA4 15
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Administrator
Password ADP=
11 bytes
No spaces
allowed. Command or Query.
Change the administrator password, where:
Example: ADP=comtech ADP =
ADP!
ADP?
ADP =xxxxxxxxxxx
(see description of
arguments)
ReadWrite
UserName RWU=
11 bytes
No spaces
allowed. Command or Query.
Change the ReadWrite username, where:
Example: RWU =comtech
To get the new user name effective, RWP must be issued
Immediately after RWU. RWU =
RWU!
RWU?
RWU =xxxxxxxxxxx
(see description of
arguments)
ReadWrite
Password RWP=
11 bytes
No spaces
allowed. Command or Query.
Change the ReadWrite password, where:
Example: RWP =comtech RWP =
RWP!
RWP?
RWP =xxxxxxxxxxx
(see description of
arguments)
ReadOnly
UserName ROU=
11 bytes
No spaces
allowed. Command or Query.
Change the ReadOnly username, where:
Example: ROU =comtech
To get the new user name effective, ROP must be issued
Immediately after ROU.
ROU =
ROU!
ROU?
ROU =xxxxxxxxxx
(see description of
arguments)
ReadOnly
Password ROP=
11 bytes
No spaces
allowed. Command or Query.
Change the ReadOnly password, where:
Example: ROP =comtech ROP =
ROP!
ROP?
ROP =xxxxxxxxxxx
(see description of
arguments)
Access Client
List
ACL= 18 bytes,
numerical Command or Query.
Used to set the Access list entry, which contains a subnet and mask.
Once the access list is enabled, only devices from the allowed
ranges are allowed to communicate with the modem.:
xxx.xxx.xxx.xxx/yy, where:
xxx.xxx.xxx.xxx is the IP address, and
yy is the network prefix (0-31)
Returns 000.000.000.000/32 when a particular Access Client is not
configured.
Example: <1/ACL[1]=010.006.030.001.24
ACL =
ACL!
ACL? ACL=
xxx.xxx.xxx.xxx.yy (see
description of
arguments)
Access List
Delete ACD=x 1-byte
numerical
1…4 Command only.
Delete the specified access list entry from the access list table.
<1/ACD=x, where x is value of 1…4
ACD=
ACD! N/A ACD=x [1..4]
(see description of
arguments)