Param file tag, Values associated with parameter – Mocomtech CDM-570 User Manual

Page 54

Advertising
background image

Page 14 of 54

MN/CDM570L.AA4

Param File Tag

Values Associated with Parameter

SNMP_TRAP_DEST

NOT-DEFINED – When the parameter is not set
IP address in string format like 11.12.13.14

SNMP_TRAP_DEST_2

NOT-DEFINED – When the parameter is not set
IP address in string format like 11.12.13.14

SNMP_TRAP_VERSION

SNMPv1 – When SNMP version-1 trap generation is selected.
SNMPv2 – When SNMP version-2 trap generation is selected.

SNMP_TRAP_ENABLE_AUTHEN_TRAP

UNKNOWN – When invalid value is set.
Enabled – When set to send the Authentication Trap.
Disabled

SNMP_SYSCONTACT

Empty string, when not set. In param file, there is nothing after = sign.
Otherwise, a string of up to 128 character.

SNMP_SYSNAME

Empty string, when not set. In param file, there is nothing after = sign.
Otherwise, a string of up to 128 character.

SNMP_SYSLOCATION

Empty string, when not set. In param file, there is nothing after = sign.
Otherwise, a string of up to 128 character.

ETHER_MAC

Ethernet MAC Address in the format 00-06-B0-xx-xx-xx. All are hexadecimal digits.

ETHER_SPEED_MODE

Possible Values are
Auto
10 MB/sec Half Duplex
100 MB/sec Half Duplex
10 MB/sec Full Duplex
100 MB/sec Full Duplex

ETHER_IP_SNET

IP Address in the format 192.168.1.50/24

Advertising
This manual is related to the following products: