Mocomtech CDM-570 - Manual (Page 22)

Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
TX Payload
Compression
enable/disable TPE= 1 byte, value
of 0, 1, 2 or 3 Command or Query where,
0=Disabled
1= Enabled (EasyConnect Only mode)
2 = PerRoute (read-only when FAST feature is purchased in
router mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in EasyConnect mode. In router mode, it’s
read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Can not enable if the 3xDES FAST feature has not
been purchased
TPE =
TPE!
TPE? TPE =x
(see description of
arguments)
3xDES
Encrypt Key DEK[1..8]= 48 bytes,
numerical Command or Query.
3xDES encrypt key [192-Bit], where:
Example: DEK[1]=
222222222222222244444444444444446666666666666
666
All are Hexadecimal digits. [0…F], a total of 48 Hex digits.
DEK =
DEK!
DEK[1..8]? DEK= x [1..48]
(see description of
arguments)
3xDES
Decrypt Key DDK[1..8]= 48 bytes,
numerical Command or Query.
3xDES decrypt key, where:
Example: DDK:0=
222222222222222244444444444444446666666666666
666
All are Hexadecimal digits. [0…F], a total of 48 Hex digits.
DDK =
DDK!
DDK[1..8]? DDK =x [1..48]
(see description of
arguments)
SMTP Server
IP Address SIA= 15 bytes,
numerical Command or Query.
Used to set the IP address of the SMTP server where mail should
be sent, in the format:
xxx.xxx.xxx.xxx is the IP address
Example: <1/SIA=010.006.030.001. When not configured, it
returns >0001/SIA=0.0.0.0
SIA =
SIA!
SIA? SIA = xx.xxx.xxx.xxx
(see description of
arguments)