Scsi chip id (scid), Scsi chip id, Scid) – LSI 53C875A User Manual
Page 122: Register: 0x04
4-30
Registers
Register: 0x04
SCSI Chip ID (SCID)
Read/Write
R
Reserved
7
RRE
Enable Response to Reselection
6
When this bit is set, the LSI53C875A is enabled to
respond to bus-initiated reselection at the chip ID in the
and
registers. Note that the chip does not
automatically reconfigure itself to the initiator mode as a
result of being reselected.
SRE
Enable Response to Selection
5
When this bit is set, the LSI53C875A is able to respond
to bus-initiated selection at the chip ID in the RESPID0
and RESPID1 registers. Note that the chip does not
automatically reconfigure itself to target mode as a result
of being selected.
R
Reserved
4
ENC
Encoded Chip SCSI ID
[3:0]
These bits are used to store the LSI53C875A encoded
SCSI ID. This is the ID which the chip asserts when
arbitrating for the SCSI bus. The IDs that the
LSI53C875A responds to when selected or reselected
are configured in the
and
registers. The priority of
the 16 possible IDs, in descending order is:
7
6
5
4
3
0
R
RRE
SRE
R
ENC
x
0
0
x
0
0
0
0
Highest
Lowest
7
6
5
4
3
2
1
0
15
14
13
12
11
10
9
8