LSI 53C875A - Manual (Page 248)

6-10 Electrical Specifications
Table 6.13 and Figure 6.7 provide Reset Input timing data.
Figure 6.7 Reset Input
Table 6.14 and Figure 6.8 provide Interrupt Output timing data.
Table 6.13 Reset Input
Symbol Parameter Min Max Unit
t
1
Reset pulse width 10 – t
CLK
t
2
Reset deasserted setup to CLK HIGH 0 – ns
t
3
MAD setup time to CLK HIGH
(for configuring the MAD bus only) 20 – ns
t
4
MAD hold time from CLK HIGH
(for configuring the MAD bus only) 20 – ns
t
2
Note:
1. When enabled.
CLK
RST/
MAD 1 Valid Data
t
3
t
4
t
1
Table 6.14 Interrupt Output
Symbol Parameter Min Max Unit
t
1
CLK HIGH to IRQ/ LOW 2 11 ns
t
2
CLK HIGH to IRQ/ HIGH 2 11 ns
t
3
IRQ/ deassertion time 3 – CLK