Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 123
Advertising
SetupTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
123
I
MPORTANT
I
MPACT ON
R
EADINGS OR
D
ATA
Before performing this procedure, make sure that the AUTO CAL for each
analog output is enabled. (See Section 5.9.3.3).
I
MPORTANT
I
MPACT ON
R
EADINGS OR
D
ATA
Manual calibration should be used for any analog output set for a 0.1V
output range or in cases where the outputs must be closely matched to
the characteristics of the recording device.
Advertising