Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 25
IntroductionTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
25
TELEDYNE ELECTRONIC TECHNOLOGIES
Analytical Instruments
16830 Chestnut Street
City of Industry, CA 91748
Telephone: (626) 934-1500
Fax: (626) 961-2538
Web: www.teledyne-ai.com
or your local representative.
Table 1-1:
Analyzer Options
Option
Option
Number
Description/Notes Reference
Pumps
Pumps meet all typical AC power supply standards while exhibiting same pneumatic
performance.
10A
External Pump 100V - 120V @ 60 Hz
N/A
10B
External Pump 220V - 240V @ 50 Hz
N/A
10C
External Pump 220V - 240V @ 60 Hz
N/A
10D
External Pump 100V – 12V @ 50 Hz
N/A
10E
External Pump 100V @ 60 Hz
N/A
11
Pumpless, internal or external Pump Pack
N/A
13
High Voltage Internal Pump 240V @ 50Hz
N/A
Rack Mount
Kits
Options for mounting the analyzer in standard 19” racks
20A
Rack mount brackets with 26 in. chassis slides
N/A
20B
Rack mount brackets with 24 in. chassis slides
N/A
21
Rack mount brackets only (compatible with carrying strap, Option 29)
N/A
23
Rack mount for external pump pack (no slides)
N/A
Carrying Strap/Handle
Side-mounted strap for hand-carrying analyzer
29
Extends from “flat” position to accommodate hand for carrying.
Recesses to 9mm (3/8”) dimension for storage.
Can be used with rack mount brackets, Option 21.
Cannot be used with rack mount slides.
N/A
CAUTION - GENERAL SAFETY HAZARD
A fully loaded GFC7001T with valve options weighs about
18 kg or 40 lbs. (GFC7001TM weighs 22.7 kg or 50 lbs).
To avoid personal injury we recommend that two persons
lift and carry the analyzer. Disconnect all cables and
tubing from the analyzer before moving it.
Analog Inputs
Used for connecting external voltage signals from other instrumentation (such as
meteorological instruments).
64
Also can be used for logging these signals in the analyzer’s internal
DAS
Sections 3.3.1.2,
5.9.3.11, and 7
Current Loop Analog
Outputs
Adds isolated, voltage-to-current conversion circuitry to the analyzer’s analog
outputs.
41
Can be configured for any output range between 0 and 20 mA.
May be ordered separately for any of the analog outputs.
Sections 3.3.1.3,
3.3.1.4, 5.9.1,
5.9.2 and 5.9.3.7