Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 153
Advertising
CommunicationsTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
153
Note
The instrument software has a 200 ms latency before it responds to
commands issued by the host computer. This latency should present no
problems, but you should be aware of it and not issue commands to the
instrument too quickly.
6.7.2.2. ACTIVATING HESSEN PROTOCOL
Once the COMM port has been properly configured, the next step in configuring the
GFC7001T/GFC7001TM to operate over a Hessen protocol network is to activate the
Hessen mode for COMM ports and configure the communication parameters for the
port(s) appropriately.
To activate the Hessen Protocol, press:
Advertising