Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 132
Advertising
SetupTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
132
5.9.3.10. AIN CALIBRATION
This is the submenu to conduct a calibration of the GFC7001T/GFC7001TM Analyzer’s
analog inputs. This calibration should only be necessary after major repair such as a
replacement of CPU, motherboard or power supplies.
To perform an analog input calibration, select the ANALOG I/O CONFIGURATION
submenu (see Figure 5-3) then press:
Advertising