Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 54
Advertising
Getting StartedTeledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
54
DTE devices receive data on pin 2 and transmit data on pin 3.
DCE devices receive data on pin 3 and transmit data on pin 2.
Figure 3-14:
Rear Panel Connector Pin-Outs for RS-232 Mode
The signals from these two connectors are routed from the motherboard via a wiring
harness to two 10-pin connectors on the CPU card, J11 (COM1) and J12 (COM2)
(Figure 3-15).
Advertising