Teledyne GFC-7001T - Trace CO Analyzer - Manual (Page 178)

DAC and APICONTeledyne API – Model T300/T300M CO Analyzer
Teledyne Analytical Instruments 178
7.1.9. RS-232 REPORT FUNCTION
The DAS can automatically report data to the communications ports, where they can be
captured with a terminal emulation program or simply viewed by the user using the
APICOM software.
To enable automatic COMM port reporting, follow the instruction shown in Section
7.1.4 then press:
7.1.9.1. THE COMPACT REPORT FEATURE
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line.
The COMPACT DATA REPORT generally cannot be accessed from the standard
DAS front panel menu, but is available via the instrument’s communication ports by
using APICOM or the analyzer’s standard serial data protocol.